Hornby Catalogue 2011 - Edition 57
|
 |
Hornby Railroad Locomotive
Smokey Joe R3064
00 Gauge
|
|
Hornby Point Motor Housing R8015
Trackside hut covers Point Motor R8014 (not included) when the point motor is top mounted. Extension arm lets you position the motorat different distances from the track. The base of the housing can also be usedto mount the motor under the baseboard
|
|
Hornby Engine Shed - R8004
Double Track Building.
Pack contains one engine shed building with 2 alternative self-adhesive finishes - brick and stone.
Clip-together assembly
|
|
Hornby Junction Home Signal R169
00 Gauge
|
|
Hornby Single Home Signal R171
Height 121mm
Signal for manual operation only.
|
|
Elevated Track Supports - R909
Piers clip to track with 'clothes peg' action.
00 Gauge
|
|
Hornby Girder Bridge R657
Clip together assembly
00 Gauge
|
|
Hornby Skaledale
Curved Platforms - 1st Radius R8642
Suitable for use inside R605 Double Curve 1st Radius and R604 Curve 1st Radius
Skaledale buildings and accessories bring an atmosphere of life and character to any 'OO' model railway. The hand crafted and hand decorated poly resin structures can be positioned on a layout without further enhancement, however, just a small amount of weathering can make all the difference.
|
|
Hornby Small Radius Curved Platform Section (Plastic) R463
Fits inside first-radius curved track.
Clips to other platform sections.
|
|
Hornby Platform Ramp Section (Plastic) R464
Length 127mm.
Clips to other platform sections
|
|
Hornby Skaledale Corrugated Nissen Hut R8788
|
|
Hornby Skaledale
Gravestones R8574
00 Gauge Scale Model for Adult Collectors
|
|
Hornby Skaledale
Cricket Pavilion R8990
Detail scale model for adult collectors
Scale model not designed or intended for play
Colour and contents may vary from those illustrated
|
|
Hornby Railroad Car Unloading Terminal R8263
Suitable for use with R6423 Car Transporter
Car Transporter, Cars and Track not included.
00 Gauge
|
|
Hornby Railroad
Automatic Level Crossing R8259
00 Gauge
|
|
Hornby Double Track Level Crossing R636
Clip together
Pack includes alternative gates
|
|
Hornby Farm Animals R565
This product is not suitable for children under 3 years because of small parts.
|
|
Hornby People Sitting R561
6 x people
2 x benches
This product is not suitable for children under 3 years because of small parts.
|
|
Hornby Working People R563
This product is not suitable for children under 3 years because of small parts.
|
|
Hornby Sheep R767
Contains
10 x sheep
00 Gauge
|
|
Hornby Trackside Fencing R537
Contains
6 x 12" (approx 30.48cm) lengths
12 x supports
00 Gauge
|
|
Hornby Track Rubber R8087
|
|
|
|
Hornby Track Planning Symbols R619
1/4 Scale Plastic Track Planning pieces
|
|
Hornby Track Fixing Pins R207
These pins are designed to fix track to baseboard through holes ready drilled in each track section. Approximately 130 pins in a pack.
Do not hammer pins down hard - you may distort the track.
|
|
Hornby Insulated Fishplates R920
Pack of 12 non-conductive fishplates for creating isolated sections of track
|
|
Hornby Left Hand Standard Point R8072
Positive 'Click' Switching contacts
Operation from either side
Fine profile switch rails
Concealed switch rail pivots
Nickel silver inner check rail/frogs
Stainless steel fishplates
Straight Length 168mm
Curve Radius 438mm
Arc 22.5 degrees
|
|
Hornby Right Hand Standard Point R8073
Positive 'Click' Switching contacts
Operation from either side
Fine profile switch rails
Concealed switch rail pivots
Nickel silver inner check rail/frogs
Stainless steel fishplates
Straight Length 168mm
Curve Radius 438mm
Arc 22.5 degrees
|
|
Hornby Left Hand Curved Point R8074
Positive 'Click' Switching contacts
Operation from either side
Fine profile switch rails
Concealed switch rail pivots
Nickel silver inner check rail/frogs
Stainless steel fishplates
Curve Radius Both Tracks 438mm
Arc 22.5 & 33.75 Degrees
|
|
Hornby Right Hand Curved Point R8075
Positive 'Click' Switching contacts
Operation from either side
Fine profile switch rails
Concealed switch rail pivots
Nickel silver inner check rail/frogs
Stainless steel fishplates
Curve Radius Both Tracks 438mm
Arc 22.5 & 33.75 Degrees
|
|
Hornby Left Hand Express Point R8077
Positive 'Click' Switching contacts
Operation from either side
Fine profile switch rails
Concealed switch rail pivots
Nickel silver inner check rail/frogs
Stainless steel fishplates
Straight Length 245mm
Curve Radius 852mm
Arc 11.25 Degrees
|
|
Hornby Right Hand Express Point R8078
Operation from either side
Fine profile switch rails
Concealed switch rail pivots
Nickel silver inner check rail/frogs
Stainless steel fishplates
Straight Length 245mm
Curve Radius 852mm
Arc 11.25 Degrees
|
|
Hornby Uncoupler Unit R8244
|
|
Hornby Electrically Operated Turntable
The turntable is designed to operate with the Standard Train Controller R965. Drive the locomotive onto the turntable, then switch the power from track to turntable via the 'on-on' lever switch R046 (supplied with the set). Your speed controller now controls the rotation of the turntable.
If you are using an HM2000 controller, then the turntable must be powered from the uncontrolled DC output with an R047 Lever Switch, 'on-off', not from the speed controller output.
The set includes eight access track sections and wiring. You can add and subtract access sections to suit your layout, up to a maximum of fourteen.
|
|
Hornby Lever Switch 'passing contact' R044
|
|
Hornby Lever Switch 'on-off' R047
|
|
